Technical Scudo heater connector - where to source

[oz0707]

Have done plenty of googling but can't seem to find where to source a new connector block or repair kit for my 2004 scudo heater connection. See photos.

Heater works fine when this connection is agitated its just melted slightly and is not making a good connection. I've found plenty of comments saying this block was changed and all was good but for the life of me can't find the block! It's obviously got to have the same profile so it fits the connection.

The only marks i could find on the connector was 'rkg' and '395'

Thanks in advance!
<a href="https://ibb.co/fpRpjb"><img src="https://thumb.ibb.co/fpRpjb/IMG_5073.jpg" alt="IMG_5073" border="0"></a> <a href="https://ibb.co/fAGpjb"><img src="https://thumb.ibb.co/fAGpjb/IMG_5074.jpg" alt="IMG_5074" border="0"></a> <a href="https://ibb.co/iYah4b"><img src="https://thumb.ibb.co/iYah4b/IMG_5075.jpg" alt="IMG_5075" border="0"></a> <a href="https://ibb.co/cuj9jb"><img src="https://thumb.ibb.co/cuj9jb/IMG_5076.jpg" alt="IMG_5076" border="0"></a> <a href="https://ibb.co/gFKaPb"><img src="https://thumb.ibb.co/gFKaPb/IMG_5079.jpg" alt="IMG_5079" border="0"></a>

 

[oz0707]

Sorry about the photo links could a moderator fix?

 

[Zog]

That's the boy! Grr! I have had Bad Thoughts about it, and considered dispensing with the connector, and soldering the wires together. Hm?

 

[oz0707]

Are you trying to find one of these too? Think I will have to phone breakers yards tomorrow

 

[Zog]

Try 1stchoice.co.uk. You only need an e-mail address, you can avoid giving your regisration number if you don't want to. They e-mail lots of breakers who send the part to you. I have used this service a couple of times & it's OK.

 

[GeorgeDamper]

Are you trying to find one of these too? Think I will have to phone breakers yards tomorrow

Albert Looms are breaking a Scudo. http://www.albertlooms.com/content.aspx?id=10

 

[Roger46]

Hi,
Did anyone have any joy with this as i have the same problem & can't find anyone who can supply this part?