E
exclusive_man
Guest
When i tried putting some 17" tsw 4 stud rims on my Brava today, the holes were a bit off and werent lining up properly, im wondering what seems to be the problem, please help guys, thanks.
Currently reading:
Rims, What Seems To Be The Problem???
W
Wimmy
Guest
How off?
What fitment are the wheels? If thery are PCD 98 they should be a straight fit. If they are PCD100 you will need a set of wobbly bolts.
What fitment are the wheels? If thery are PCD 98 they should be a straight fit. If they are PCD100 you will need a set of wobbly bolts.
A
Ash
Guest
the wheels you have have 100mm gaps between the bolts and the car is 98mm between the bolts. you need special bolts called wobbley bolts you can pick them up off ebay quite cheep.
OP
OP
exclusive_man
Guest
Wimmy, not sure of the PCD on the rims but as Ash said, might need to buy the wobbly bolts, thanks guys, will look into it, do you know if i could get them from normal tire shops or even Helfrauds.
B
Buzz
Guest
motorworld are quickest, but halfords do them, and most small local motor factors can get you them. sliding head bolts i think is the official title.
Buzz
The champion of the Bravo 1.4 & now ex owner of a Bravo 1.8
Buzz
The champion of the Bravo 1.4 & now ex owner of a Bravo 1.8
OP
OP
exclusive_man
Guest
Thank Buzz, i'll check 1st thing in the morning.
