Technical Reversing Sensors

[Motorcyclist Colin]

In the view(s) of this Forum, which are the best reversing sensors
"Best" in terms of Performance, reliability, cost, fitting ease.?

From an old, old goat (motorcyclist) with a stiff neck, badly lit, small parking space, and only one, revering light on the wrong side. (Not to mention senile decay oops just mentioned it)
Thanks in advance

 

[The Panda Nut]

I bought from eBay OEM Fiat ones. £59 BUT i reckon 55 or even 50 would have got it. The inside of the bumper is pre marked so fitting was straight forward. I did a guide which is in Panda >2012 section. I also uploaded the fitting instructions. Its something I never thought was necessary but Ive big neck and back problems recently so I reckon worth its weight in gold now. They are still on offer, Im thinking of fitting mrs PNutscar with a set.

 

[The Panda Nut]

I bought from eBay OEM Fiat ones. £59 BUT i reckon 55 or even 50 would have got it. The inside of the bumper is pre marked so fitting was straight forward. I did a guide which is in Panda >2012 section. I also uploaded the fitting instructions. Its something I never thought was necessary but Ive big neck and back problems recently so I reckon worth its weight in gold now. They are still on offer, Im thinking of fitting mrs PNutscar with a set. They sound continuously at a foot gap or 6"from the side. Worth every penny.

 

[Motorcyclist Colin]

Thanks PN.
I've searched Ebay but blowed if I can find the ones you got.
Will keep looking

 

[Big gerry]

Thanks PN.
I've searched Ebay but blowed if I can find the ones you got.
Will keep looking

Thanks PN.
I've searched Ebay but blowed if I can find the ones you got.
Will keep looking

 

[The Panda Nut]

https://www.ebay.co.uk/itm/285698114558 As above. I made an offer which they accepted. Happy to help if you want to talk fitting. The worst bit was getting the bumper off but I think the cross bumpers are worse than the standard version. Being standard Fiat issue no issues except the programming, but I have not done this and they worked straight from the box. I get a beep on start up which I believe might go away if I did the full calibration but this just tells me its working. I think the calibration is really if you have a towbar fitted. Mine removes so I just leave it alone....