- Joined
- Jul 22, 2014
- Messages
- 228
- Points
- 123
A huge thanks for the "how to's" on here..
I started Powerflexing the rear of my Sei today.
Got the drivers side done and hopefully the other side tomorrow.
All went fairly well and taking it steady, it took me just under 4 hours.
Used a puller to get the old rubbers out after heating up the metal surround with my
gas blow lamp. Hacksaw to the sleeves, one cut each and they tapped out easily.
Biggest problem I had was lifting the arm into position to slot the bolts in...
My 68 year old duff back struggled as I had left the hub on.
Got the bushes and new nuts from Mick at Eurocarcare.
Dead chuffed...hope the other side goes well
Phil
I started Powerflexing the rear of my Sei today.
Got the drivers side done and hopefully the other side tomorrow.
All went fairly well and taking it steady, it took me just under 4 hours.
Used a puller to get the old rubbers out after heating up the metal surround with my
gas blow lamp. Hacksaw to the sleeves, one cut each and they tapped out easily.
Biggest problem I had was lifting the arm into position to slot the bolts in...
My 68 year old duff back struggled as I had left the hub on.
Got the bushes and new nuts from Mick at Eurocarcare.
Dead chuffed...hope the other side goes well
Phil