Rattly twin pipe :(

[Moog75]

Hello peeps. Any of you lot got any experience with twin pipes rattling away on a back box? as my VXon lot haven't got the foggiest how to help on this.

Just started last week, I've got the stainless mongoose system on the right in the pic below, the twin ovals are knocking like a right biatch.
Any aftermarket chocks or seperators I can get or will a quick tack from the MIG welder help?

Thanks in advance for the help

 

[sumplug]

Hello peeps. Any of you lot got any experience with twin pipes rattling away on a back box? as my VXon lot haven't got the foggiest how to help on this.

Just started last week, I've got the stainless mongoose system on the right in the pic below, the twin ovals are knocking like a right biatch.
Any aftermarket chocks or seperators I can get or will a quick tack from the MIG welder help?

Thanks in advance for the help

the resonators have come adrift inside the exit pipes. personally i would pull them out, but you could tack them back in. are you sure its those rattling and not the silencer box?
your vauxhall mates are a bunch of numpties eh?

 

[custard]

are the rubber hangers in good order? sometimes(depends how its striking)cable tying the rubber hangers tight can help.
do you know what exactly its striking?

edit: i thought it was a newly fitted system

 

[christopher watson]

sound like the original weld is starting to give (happened on a mates scooby). solution is to weld a small bar between the two pipes (behind the chrome ends).

 

[custard]

i had a similar problem with a janspeed on one of my mk3 cavvys. ended with one of the tailpipes falling off

 

[sumplug]

all you have to do is ping them to see where the rattle is. iam sure its the internal resonator/restrictor[as shown in the picture]

 

[Moog75]

your vauxhall mates are a bunch of numpties eh?

Be nice now nah most have big bores and cherry bombs me thinks

Thanks for the VERY QUICK reply guys.
Deninately the pipes that are loose and not the resonators (tempoary chocked with some rubber) so looks like a welding job (cheers Mr Watson) but atleast it's gonna be cheap

Thanks again peeps

 

[Moog75]

Just a little update.
The weld between the left pipe and the back is slighly loose, about a 2 inch play I'm amazed that there's no hole in it.

Anyway, new box on the way....thank jolly for a 15 year warranty