POWER CAP

[Danny]

Alright again all, got in from work and my new power cap had arrived sweet i know very few of you agree with the use of caps but its just for show in my install. instructions came with it but they are not clear at all has anyone else with a cap got some better instructions for fitting that they could post any pics of the cap just so i can get a good idea of what i need to do. ive spent **** loads on ice over the past 2months and i want it all to done proper spent loads on decent 4gauge and speaker wire so it should be good just need to get the mdf and some fabric trying to source some decent alacantre, anyway cheers in advance all Danny.

 

[dank_army]

ever heard of one of these:

 

[Si]

How many amps are you running?

Main 4-gague cable from the battery needs to go to the positive on the cap, then a lead from there to your amp or a power distribution block.

Run a 4-gague earth cable from the negative side of the cap to an earth point and run your amplifier earths to the - cap.

Does that make sense?

 

[Danny]

Re: Re: POWER CAP

Yes i have you cheeky sod but i dint think this was a bloody english lesson, seing as i left school 3 years ago i just thought it was a way for me to get my points, views or questions across quickly.............................................................................................Danny

 

[Danny]

Re: Re: POWER CAP

yes mate that makes sense but the instructions i have says its neccesary for me to also connect the neg from the battery to the neg on the cap.

 

[Richard]

Re: Re: Re: POWER CAP

No you dont need to run a cable from the negative of the battery. use the same negative point as your amplifier, seat belt bolt or similar.

Richard