When I put the laptop on later I'll write a guide, but it's child's play mate. Easiest job ever to change. Like I said, all you need is a t15 driver, but it must be 89mm long. Halfords. £4.49
General Paint code
- Thread starter Bravo Man
- Start date
Currently reading:
General Paint code
80 mm sorry
Ignore the bright light, that's my flash on my fone, but that's the colour of my car
Hmm, that looks a little different to mine. Same colour for sure, but that's some sparkly finish you got there.
To send a message to me, just touch my profile pic, well that's what I do on the iPhone anyway.
Speak later.
Your thoughts please. Not done the top grille, not sure if I should or not.
Do like the Abarth touch though, although I'm sure someone will slate me for putting that in. Lol.
It's the rear doors that you need the long driver for. Remember to push the bold all the way in when you've unscrewed it or the clamp won't release the lock/lockcover
Bolt. Not bold
Lol, what you like with gear boxes? Wanna do mine?
Pmsl, my symptoms are pretty much the same as everybody else with the M32 gearbox. It's got knackered bearings in there. Hope yours is ok.
Your gear stick doesn't flick back in first and 3rd gear does it? Sometimes 5th as well.
From all the research I've done the only way to stop it is, either you're a lucky sod, or change the bearing that sits on top of the sixth gear. It's a vauxhall box and its ****. Lol
It is used in many cars, corsa vxr, Zavira, bravo just to name a few.
Fiat are fully aware of the problems, but you're like me I think, out of warranty.
The new bearings are upgraded now mate, you'll only need it doing once. If you're competent with boxes, I'll bring mine up to Glasgow for you to do mine. I'll pay you of course.
OP
OP
Bravo Man
New member
- Joined
- Apr 28, 2013
- Messages
- 140
- Points
- 27
Mines is a 57 plate with only 39500 miles but not sure if the bearings will be upgraded on mine if yours isn't done on a 09 plate my days of rolling about under cars are way past me, and i just done a search bye a few hundred pounds is a rough price to replace 6th gear bearings and set the cruise control
my days of rolling about under cars are way past me, and i just done a search bye a few hundred pounds is a rough price to replace 6th gear bearings and set the cruise control 
