Technical OEM Headunit w/sub and amp, possible?

[Oakley28]

Hey, getting sick of how crap the stilo's dash now looks with an aftermarket single din headunit in. Looks very plain.

So ... I was wondering if anyone know's any devices, or indeed any way, to be able to connect a sub and amp to the original unit that is in the stilo? The original unit is a nice unit and suits the car, and if possible i would like it back in.


P.s. also are there any device that can also be connected for use of an iPod too?


Cheers.


Stuart.

 

[OzMoSiS]

yes to both.

you need a line level converter for the first, and one with aux input for the second.

i did this a very expensive but high quality method using a Rockford Fosgate 3sixty.2.

you can also use a 3sixty.1 which is less complicated, or a JL Cleansweep.

cheaper option: Kicker KQ-9 (which I also used, but has no aux input)

http://cgi.ebay.com/CLARION-EQS746-...temQQimsxZ20090501?IMSfp=TL090501125007r23423 (awesome, but needs an additional rca/line level converter)

 

[tenwierdufos]

alot of amps have a high gain input built into them, so you can just wire that into the front or rear speaker outputs.

 

[Oakley28]

yes to both.

you need a line level converter for the first, and one with aux input for the second.

i did this a very expensive but high quality method using a Rockford Fosgate 3sixty.2.

you can also use a 3sixty.1 which is less complicated, or a JL Cleansweep.

cheaper option: Kicker KQ-9 (which I also used, but has no aux input)

http://cgi.ebay.com/CLARION-EQS746-...temQQimsxZ20090501?IMSfp=TL090501125007r23423 (awesome, but needs an additional rca/line level converter)

How would you wire something like that? And where would you mount it?

Cheers.

 

[Morty Mort]

Here is how you want it done:

https://www.fiatforum.com/stilo-guides/150419-space-thrifty-amp-install-oem-head-unit.html

M.