Hi, I am new to this forum and could do with some help.
the car is a 2003 1.2 Punto non abs
I have the no speedo and very light steering issue, I know there has been a lot of threads on this, but I can find anything that helps me fix it or what the problem really is.
on Autodata it tells you to test the sensor with a LED light, so i thought first of all I would check the power feed to the sensor, I have 3 wires and I am assuming Earth, Signal, Power. I have no power feed with the ignition on. So I think that is the start of my problem. No point putting a LED on the terminals because I have no power feed.
When these cars have a power feed problem , there is talk of a MOD loom, I would think that it is picking up a feed and probably an earth from another place. Why not find the break in the wire?. it is not a very big loom.
I cant find out if I should have 12v or 5v, and why cant I pick up the live from another sensor.
I hope I am making some sense .
Can anyone help please
Paul
the car is a 2003 1.2 Punto non abs
I have the no speedo and very light steering issue, I know there has been a lot of threads on this, but I can find anything that helps me fix it or what the problem really is.
on Autodata it tells you to test the sensor with a LED light, so i thought first of all I would check the power feed to the sensor, I have 3 wires and I am assuming Earth, Signal, Power. I have no power feed with the ignition on. So I think that is the start of my problem. No point putting a LED on the terminals because I have no power feed.
When these cars have a power feed problem , there is talk of a MOD loom, I would think that it is picking up a feed and probably an earth from another place. Why not find the break in the wire?. it is not a very big loom.
I cant find out if I should have 12v or 5v, and why cant I pick up the live from another sensor.
I hope I am making some sense .
Can anyone help please
Paul