New Trim :)

[Mike]

looks alot better than the blue cloth i used to have.But what a pain in the 'hand' it was trying to get the bottom rear seatbelt bolts out,tight wasnt the word! lol Think its cus they had glue on them from factory.But all in all,a full days graft swappin interia over

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

A Fiat Marea in a Bravo Shell
MOT time soon

 

[Kyle]

nice, simple interior.

makes me jealous

 

[Mike]

lol chuffed with them tbh

A Fiat Marea in a Bravo Shell
MOT time soon

 

[Ant Wells]

Looks miles better mate, glad you like them

Found a few bravo's breaking not far away so I may require your services soon!

 

[Mike]

cheers mate
and yer no probs mate,just give us a bell.

A Fiat Marea in a Bravo Shell
MOT time soon

 

[Adrian-Bravo]

Hey Mike,
The leather looks ace, it finnishes the Bravo off nicely. Those rear seat belt bolts are a sod. Have you got front seats to go in?

Put something on the back of the bolts from under the arch, Like copper slip to stop the thread rusting and check the surrounding anti stone chip.

 

[marko]

It is possible to get the rear bench in and out by removing the screws and clips from the back of the seat. Then undo the retaining hinges x3 and replace with the new ones. It cost me dearly to replace the bolts that hold the seat bracket to the chassis since they had completely corroded. You can also cut around the seat belt mounts for the rear cards. No one will see a small cut under the rear seat.

 

[Mike]

Thanks and they do dont they,finish my car off nicely

yer i got front seats in the house at the mo as im keeping the buckets in for now.Front seats will go in at some point when my buckets go in to get retrimmed and new cushioning put in.
Just need an off cut of some leather or similar to recover my armrest.

Mike

A Fiat Marea in a Bravo Shell
MOT time soon

 

[Mike]

thats how i got them out mate,took the hinges off the back edges of the seats..But what a pain in the ass it was to get them back in,to line the holes up so the screws would screw straight in! lol

It cost me dearly to replace the bolts that hold the seat bracket to the chassis since they had completely corroded. You can also cut around the seat belt mounts for the rear cards

Thats the first way i originally tried cus if they came out,the whole rear seats would come out together.But no such luck,i ended up snapping a torx bit as the bolt was waay old lol had 2 nip up 2 halfords and replace it (thankgod for lifetime guarantee
and yer i did use my snippers on the bottom of the door card right upto the rear seatbelt bolt to get it out lol Gave me a bit more room and leavage to get the seatbelt bolt out then
* that wasnt on the leather doorcard,that was on my cloth one lol *

Mike

A Fiat Marea in a Bravo Shell
MOT time soon