ahmad samaha
New member
- Joined
- Feb 20, 2017
- Messages
- 2
- Points
- 1
Need Help , to install a city power for a none powered steering punto mk2 year model 2000 . Can any one tell me the steps and what to purchase to do it .
Im gonna assume ur gonna need a complete loom / ecus / coloumn etcNeed Help , to install a city power for a none powered steering punto mk2 year model 2000 . Can any one tell me the steps and what to purchase to do it .
Nope im affraidThanks all , it seems that I will need to do what Ziggy suggested .
Ziggy do you have a certain checklist or step by step how to do this swap .
The racks are yes differentRemember that the steering rack is also different - the non-power steering version has a different gear ratio, than the one with, so it'll likely feel very light in steering, if you don't swap it as well
The racks are yes different
Variable ration to give as much mechanical leverage when your near lock to lock
Where as power steering racks are flat rate
Note as well there are 2 - 4 different spline rates as well... so getting the shaft to match is important...
This is gonna be a very labourous job....
Ziggy
Rack to collapable shaftwhat do you mean with that, spline ? pic?