190416_10150424734800478_628405477_17154028_1639188_n.jpg

Grande Punto My White GPS T-jet Progress Thread

Introduction

Hi just thought id say hello and post up my T-jet, only had it three weeks and so far im loving it.
Full pin-stripe leather, cruise control, built in sub and all the other usual spec.
Only current mods are the stickers ;)
Plans for it are: Induction, Forge FMIC, Abarth Turbo, Performance Exhaust and Mapping.

Cheers.
  • Like
Reactions: Stz1984 and JCarp16
Sorry I just read back and realised you had your exhaust done I dont know how I missed it. Yeah I am still on the standard exhaust lol I would of made a higher torque level if it was done back I just wanted to get the turbo on asap as Im starting my new job soon I wouldnt have time to get it done also want to find a decent exhaust place too. But lows sound good though :)

Ahh right I see, well I would highly recommend Pipewerx, think it was around £300 for cat back with a center box and back box ^^ vv (y)

Very nice loving the new exhaust system... thinking of getting it for mine.. how much for it all?


really liking this GP looks ace and by the vid looks like it goes aswel :)

good work mate(y)

Thanks alot bud

where did u get that "T-jet inside" sticker from? i need one!!:)

From here ;)
 
This post contains affiliate links which may earn a commission at no additional cost to you.
cheers for that link mate! have to get one ordered. your car looks mint aswell, wish i got a white one now:(
 
Bit of an update:
The red mirror caps and stripes have gone but otherwise theres not alot of work been done to the punto recently with one thing and another, plus been working on the track shed :p

11106.JPG


Just a few pics and a quick list:

Purchased some new wheels, 17" Tsw big deeps, same as what Dom130 was running, still need to get them painted, havent got a pic but for reference..

584.JPG


Oh and more new wheels :D

4107.JPG


Pressed plates

2188.JPG


Tinted my rear lights with red film but after a few weeks with my indicators looking like my brake lights have now gone to dark tint

3147.JPG


Also got a debadged grille and LCR splitter fitted to tidy the front up abit

840.JPG


656.JPG


Still riding high atm, but hopefully will be sorted at the start of the new year ;)

Comments welcome oh and Merry Christmas (y)
 
Update

Coilies back on due to having rear shocks replaced under warranty.
Only put the rears on currently with some camber, front will be on before next weekend, just hoping the shaft doesnt decide to pop out again


IMG_01444.JPG


IMG_01756.JPG


IMG_01513.JPG


IMG_01633.JPG


Camberr:

IMG_01654.JPG


IMG_01824.JPG


Stripped rear:

IMG_01662.JPG


Carbon wrapped bits to match dash:

IMG_01692.JPG


IMG_01714.JPG


IMG_01701.JPG


IMG_01682.JPG


Comments welcome
 
Last edited:
You missed the seat belt clips :p and the side carpet! Looks pretty mental low but either the front needs to go down or the back up, looks uneven.
 
hmm looks suprisingly like MY CAR ,so either move where i live so we can roll togther or stop copying!!!!???? lol... very nice mate! :yum:
how did u get soo much camber? lol..

and what coilies do you have then??
 
Car looks awesome mate :D, I don't know whether to do the cupra spiltter?!
 
cars looking lovely! did the bbs lm's ever get put on!? i want them!

get some spacers to give a better stance with that camber!

Thanks bud, unfortunately the bbs were too low of an offset and with adapter they would have been way out the arch so sold them on for a nice profit ;)

You missed the seat belt clips :p and the side carpet! Looks pretty mental low but either the front needs to go down or the back up, looks uneven.

Haha front is getting decked dont worry, and im getting all the rear in carpet to tidy it up abit, sack having rear seats (y)

hmm looks suprisingly like MY CAR ,so either move where i live so we can roll togther or stop copying!!!!???? lol... very nice mate! :yum:
how did u get soo much camber? lol..

and what coilies do you have then??

SORRRYYYYY :eek: the wheels will set them apart tho when I finally get some ;) Thanks bud, im off to UD at the weekend so might see you there if you decide to go. To get the camber I looked everywhere for shims but couldnt find anything so stuck some 7mm washers behind the bottom bolts on the rear hubs, bit of a bodge way but they work just as well lol. And I gave up on the expensive coils idea due to them not going low enough the FKs will do for now.

Car looks awesome mate :D, I don't know whether to do the cupra spiltter?!

Cheers Tom, LCR splitter is always a good cheap mod, it makes the car look lower and abit meaner imo, you should do it.
 
That's alright mate, u just remember where those sick ideas came from hehehehe...

What wheels u thinking about getting then? Spill the beans!?..
And how are ur tyres lasting with all the camber then?.
I probably won't be coming to ultimate dubs mate, it's 3 hours for me but I would love too! . Sorry buh! We will have to meet at a show sometime :cool:
 
That's alright mate, u just remember where those sick ideas came from hehehehe...

What wheels u thinking about getting then? Spill the beans!?..
And how are ur tyres lasting with all the camber then?.
I probably won't be coming to ultimate dubs mate, it's 3 hours for me but I would love too! . Sorry buh! We will have to meet at a show sometime :cool:

Haha deffo, as said before no one likes a copy cat, so il be taking a slightly different look ;) and no worries we will sort something out sometime, and haha iv not looked tbh, rear 20mm spacers will be going back on tho for scrubbage :D
 
lol thats alright i dont mind!.. and sounds good! there is stanceworks meet in a month or so.. up for that maybe?..

also with 20mm spacers and the camber you have!.. will look so good! .
i cant have any camber really.. drive too many miles soo ill go through tyres too quick :'( ..

looking very very nice though mate and love the big illest sticker
 
looking good la, ready to show the dub boys how to lay frame on sunday ;)
 
Back
Top