Tuning Manifold Pipe Bending

[jamiewilson]

Thanks for all the replies guys! Much Appreciated!

But i managed to get that 1242 supersprint that was in the classifieds. And subsequently sold the 1108 one. The 1242 had a crack in it at the lambda boss, but it's been welded up so should be ok (i hope!).

I've fitted the manifold and just waiting till friday to get a bit of pipe made up with that compensator on it. Just one more question! What torque should the compensator bolts (the ones with the springs) be at?

Can't wait to have a working exhaust! Missing not driving it

Cheers

Jamie

 

[fingers99]

Tight enough to allow the springs to work, not so tight that there's no movement. Start with it as slack as you think may be right, test it (hand over exhaust), adjust if necessary.