Technical Locating grommet on firewall!

Currently reading:
Technical Locating grommet on firewall!

hi i have a 2007 punto and i am wanting to put LED strips in the foot wells and i am struggling to find the hole through the fire wall could anyone help me please

Might be best to ask in the appropriate Punto section.
 
I have a 2007 panda 4x4 and have just fitted a towbar. The fire wall is heavily padded in the engine bay and cabin and I'm finding it difficult to find a way through
 
Behind/under the batterytray. Large rubber grommet aprox. 4x4 cm.

gr J

Yes agreed. Ours had a natural space for a single additional wire that just needed poking through. I got some thin wiring feed rods but any piece of high tensile wire about 2 foot long will allow you to pick up the end and pull a wire through. I used it to wire the fog light switch in out Mylife. Remove the battery and the battery holder and all will be clear.
 
Last edited:
Hi hi, i’m trying to get a cable for a subwoofer through the firewall of my 2003 fiat panda. I can’t seem to find a hole that isn’t occupied. The pictures i saw here and discriptions seek te be of newer models. Anyone has an idea? Otherwise i’ll cut a hole extra
 
100 % sure it is there if you look up above the clutchpedal (LHD).

gr J
So am I

There used the same basic shell for the basic models LHD, RHD and just filled what not used

Even things like the 4x4 which have some different panels, the majority is still the same

They have changed the sound blanket thing from time to time, I wonder if it's just covered over
 
Back
Top