IMG_20120425_145937.jpg

Panda (Classic) John Dragon Man's 4x4 Sisley

Introduction

Hello!

Well, I have been waiting a long time to do this!

Introducing (Drum roll please!).....

Edit: about half way through the time it took me to get the car on the road it found the name Talon. So everyone Meet:
Talon. My Fiat Panda 4x4 Sisley:

attachment.php

attachment.php

attachment.php


Great Looking car.. As i am sure you all agree!

It has its Good points:

No Horrid noises in any gear and the 4x4 system works and sounds brilliant! Its a Sisley! And it came with some nice extras such as the light grill covers.

and also nice low mileage.
attachment.php



And it has its bad points... Lots of bad points:

Mid body rust, This is the worst on the drivers side (in the UK) front wing:
attachment.php


The Doors are Rusty.. Ok, i did expect this as it seems to be a common thing on most Fiats over 10-15 years old:
attachment.php



And the other Door, Not as bad.. I may be able to save this side!
attachment.php


"Phantom Electronics" the electronics do what they want to do, when they want to do it. No Switches necessary!

Also the Fuse box now lives here :( That means that a flap has been cut in the pocket :(
attachment.php


The Exhaust is very broken, in multiple parts. even the down pipe!
attachment.php


Lastly and by far the worst, Under body rust. Now its not as bad as it could be. The rear sills on both sides have a small 1 - 2 inch hole in them. No biggy.
I have still yet to remove all the plastic wheel arch liners and have a proper look.
Here's a picture from the front drivers side wheel arch, its only a skin so a easy repair:
attachment.php


A bit of work needs doing to the brakes, pads i think. The fluid needs changing and the drivers side front brake pipe is corroded so i will replace that.

Also the engine needs a good cleaning up, a full on service replacing the water pump, cam belt, tensioner pulley, distributor cap and rotor arm, filters, oil, radiator, coolant and starter motor.

I also need a few things like a locking filler cap, the little clips that hold the air box together, a new boot gas strut and a non damaged back bumper.

Its the car I have always wanted right from when I was a young lad. So you can imagine how I was when I won it on eBay for a grand total of £547. Getting it from Wales To my home town of Derby Cost me £135.

With some love, care and late nights I reckon I can turn it into a cracking motor!

Oh and stay tuned as I will be keeping a Video Log of what I will be doing to the car on Youtube!

This is the video i took just as the car transporter left from delivering it:




See the rest of the videos Here: Fiat Panda 4x4 Sisley Restoration Video Logs

See my Youtube Channel >>>Here<<<

Also Click Here for more up to date pictures of this car!

I am so very proud to be the owner of a Fiat Panda 4x4 Sisley!

:D:D:D


Edit: this is how Talon looks now:



:eek::cool::cool::cool::yum:

Since then Talon has gained more lights, and now has some blue rust free Seat Marbella doors. I had also converted him to Fuel injection, however the parts i used were old and worn so now it is back on Carburettor.

This thread has its ups and downs but through the years Talon and myself have pulled through.

When you are done reading this thread, be sure to check out the little red scrap yard rescued Seat Marbella thread and also Project Fallout!

Peace all and enjoy the thread, videos and pictures!
yes i know the heat gun trick. what works really well is if you coat the bumpers with a light coating of something oily. then use the heat gun on them. as it impregnates the oil back into the plastic and makes it last way longer than just heating it up.

worked on vauxhall plastics heh.
 
Does your dad have the drive others cars extension on his policy? I do and I rang my insurers asking if I could drive my friends car with no exsisting insurance policy on the vehicle to a testing station and they said I was covered to drive it 3rd party as long as I had the owners permission, wasnt charging for doing it and do not own the vehicle.
 
i do not know.
i was watching so uk police thing and a guy got caught taking a car for an MOT that did not have insurance. he said to the cops "dont worry my insurance covers other cars" the cops checked, and yep he did. but because the car has no existing insurance he got done for it :/

i still think i am going to play it safe and insure the car.
 
:yeahthat: Better to be safe than 6 points, some cash, and a car down.....

My new policy actually states that the other car must have its own insurance, as well as the usual not owned by you stuff. I think that's good as it makes things clear - about time too!! (y)
 
Hi John,
realy good job mate, have you manage to get a rev counter? you did mention something earlier, it realy helpfull thing, have a look on fly bay Item number: 130776944380.
 
hi dude i know how annoying it is when people say when you gunna get it on the road, nag, nag, nag :mad:. congrats its running great youll have to bring it down south some time (y) and doors look good now the winders work better :rolleyes:
 
i just chucked away some of that pipe lol was off the sei and used half on cinq and chucked the rest :eek:
 
heh I like your "cold starts" at 13 deg. celsius :) it's nice to live on an island ,where 13 is cold, Polish coldstarts are from minus 10 (y) I know I know, "cold" is about the engine temp, but it sounds funny anyway:)

BTW: talon looks really good now!
 
Last edited:
heh I like your "cold starts" at 13 deg. celsius :) it's nice to live on an island ,where 13 is cold, Polish coldstarts are from minus 10 (y)

Dzień dobry! (My ex-wife is Polish....) :wave:

Landlocked as we are in the middle of Britain, we had minus 10, regularly, last year... (and minus 13, one night, driving up the M6 motorway, past Birmingham...)! :eek:
 
well cold as in the engine not being warm.. last night however i did a cold start, it was 7.c and it fired up in less than one rotation of the engine. i was well chuffed.
ringing around today trying to get temp insurance but no one wants to cover me :(

Do it online: https://www.tempcover.com/

We covered my dad for cheap enough. (y)

Dom
 
Hey guys. as a vote, what font do you think suites the little panda car's name?
have a look at the picture i just did on paint using a few fonts i have acquired over the years.

i was actually working on my own word, hand drawing it. its been a long time since i actually drew anything though and it does show. not that i was any good to start with!
 

Attachments

  • Talon.jpg
    Talon.jpg
    205.5 KB · Views: 76
Back
Top