nickpaokgr
New member
- Joined
- Jun 8, 2017
- Messages
- 24
- Points
- 13
Hi i wanted to ask some questions about installing interior light. So here we go
1. is it possible to fit a small signal push button on my central console blank button? the one next to the rear fog.If i cut the blank button plastic a bit so it can move like the others and glue a tact button behind it (for relay signal) pull the wire outside this whole thing maybe with a small hole in the plastic, add a relay , take power from the cig lighter. Will i be able to make it work for footwell leds?
2. Can i get both power and signal from my cig lighter for the leds and 1 relay? Because the source from the lighter is 12v 20amps if i am correct. Will this 20amps burn my leds or the relay?
3.Also i want to change my dashboard color from the stock orange to blue, if i take out the dashboard and apply a blue adhesive transparent film behind the things i want to turn blue will this work? Because my soldering skills arent that good so i can buy blue leds and change the stock ones.
Thanks in advance
1. is it possible to fit a small signal push button on my central console blank button? the one next to the rear fog.If i cut the blank button plastic a bit so it can move like the others and glue a tact button behind it (for relay signal) pull the wire outside this whole thing maybe with a small hole in the plastic, add a relay , take power from the cig lighter. Will i be able to make it work for footwell leds?
2. Can i get both power and signal from my cig lighter for the leds and 1 relay? Because the source from the lighter is 12v 20amps if i am correct. Will this 20amps burn my leds or the relay?
3.Also i want to change my dashboard color from the stock orange to blue, if i take out the dashboard and apply a blue adhesive transparent film behind the things i want to turn blue will this work? Because my soldering skills arent that good so i can buy blue leds and change the stock ones.
Thanks in advance