Brilliant thanks! No haven't touched the oil. If thats the issue may just leave it for the professionals as it's due in the garage wednesday anyhow. Just thought I'd give this one a shot myself first!
Many thanks, Its the gearstick thats not springing back to neutral. (On all axis) I tried it with the cables detached and yep moves freely, also pulled at the cables gently and it moved the stick. Could the problem be in the actual lever in that case?
Connected them back up & same problem, the shaft I'm referring to is on the posts higher up where its been cleaned up with emery paper. Going by the guide here I'd have to remove the remote with the 3x13mm bolts to get at it?
It's going into the garage anyway on Wednesday for a boatload of issues
but this is kind of low priority compared to the rest, so figured I might as well take a look myself.