Tuning Grande T-Jet fitted with abarth turbo

[tim1989]

the 500 has a t-jet engine so that must run at around 140standard if the punto does so you must get more then 135from the abarth 500

 

[punto_matt]

No one has ever said any different? SS version uses the same turbo and that has 160ish bhp.

 

[Repsol Joe]

The part number on my turbo is 55218934. can any1 comfirm if this is what is used on the 150 bravo or 157 mito

 

[punto_matt]

Why did you buy a turbo off someone that only has 4 posts anyway?

 

[adamcot]

Bravo - 150HP 1.4L D 07- IHI 55212916

 

[Thunderchump]

http://www.buren-hallum.nl/Fiat/Turbo's%20Fiat.pdf
http://www.buren-hallum.nl/Alfa Romeo/Turbo's Alfa.pdf

Mito 135 - 55218934

 

[Kurtis]

That pdf is wrong, The 55218934 is for the Mito 155 as per Eper

 

[Repsol Joe]

Thanks for all your help. been to a italian car specialist today and he comfired the turbo i have is off the mito 155 bhp so all is well and I should get some good results once remaped.

 

[welshlad]

Thats right joe mate i told you the turbs were true and was i good to my word mate. any one else want one let me know but excuse the dodgy write up if fit them i don't know everythong about them. joe ill be in touch with part numbs etc of exhaust asap

 

[Marc100HP]

A while ago i fitted a abarth turbo,Abarth SS air filter and a Raggazone rear demper without a mid demper.I got 154 HP and 270Nm of torque.Now the next step is Colombo Bariani cams.After that i maybe mount a Raggazonne downpipe or supersprint with a 200 cell cat and a Forge intercooler.I hope the cams will give more power at higher revs.

 

[punto_matt]

Intercooler will increase power further up the rev range as it will enable the car to hold peak power for longer.

 

[benpunto]

But i have most mods you can have on the t-jet on only achieved 172bhp and herd that red dot rollers read high there, just need to know abaout boost sensors, and herd theres 3 of them? true? and would they make much difference?

 

[punto_matt]

Someone else has made 190bhp on a Tjet with standard boost sensors and FMIC, Abarth turbo, custom exhaust and Forge induction.

 

[benpunto]

Do you know if its a later model and if its got the multiair cylinder head on it?

 

[punto_matt]

It was an early Tjet. Forges development car.

 

[nedxcom]

Matt you realy have here a great project.. how many horse power do you have now?!

By the way, do you open your front ligths to paint in black color to look like abarth ones?!

 

[punto_matt]

About 155bhp at the minute. I bought a set of abarth lights for my car.

 

[Marc100HP]

The same as i got with my tjet with Abarth turbo.I am curious how other guys manage to get more than 155Hp out of it....

 

[punto_matt]

Is your car remapped or have you just put it on?

 

[Marc100HP]

It got a BMC airfilter from the SS,a Ragazonne midpipe en Ragazonne rear demper,Abarth turbo and it got a remap.
At this point we can't get any more BHP because the camshafts don't allow us to get more air into the engine.Next step will be Colombo Bariani camshafts.