Bought some 2nd hand 17" alloy wheels made by KEI Racing this morning, I believe their offset is 42 and they are 7" wide.
Went to fit them this afternoon using the spacers supplied with them, started with the rear drivers side wheel. Fitted the KEI Racing alloy using the supplied spacer (think it's either 7mm or 5mm, not sure though) and when I lowered the car off the jack it looks like one of the rear suspension bolts is touching the tyre wall. I didn't bother trying to drive the car to see if it was rubbing as I didn't want to cause any damage to the tyre.
Just wondering what size spacers I need to fit 17x7 alloys to a Punto Mk2? Will 10mm spacers on the back be ok or will I need 15mm?
Any help appreciated.
Went to fit them this afternoon using the spacers supplied with them, started with the rear drivers side wheel. Fitted the KEI Racing alloy using the supplied spacer (think it's either 7mm or 5mm, not sure though) and when I lowered the car off the jack it looks like one of the rear suspension bolts is touching the tyre wall. I didn't bother trying to drive the car to see if it was rubbing as I didn't want to cause any damage to the tyre.
Just wondering what size spacers I need to fit 17x7 alloys to a Punto Mk2? Will 10mm spacers on the back be ok or will I need 15mm?
Any help appreciated.