factory fitted sub punto 02 Go!... help!

Currently reading:
factory fitted sub punto 02 Go!... help!

heonix

New member
Joined
Oct 3, 2011
Messages
4
Points
2
hi

i have got a factory fitted sub which i have no intention of upgrading, i have recently bought the car and replaced the standard casset tape deck and put a pioneer HU in. i am now left with a female yellow plug which i assume goes to the sub, my HU does not support the input. everyone i ask says i need a different iso plug but can never be specific of where and which one i need i think i need a male yellow plug to male 4 channel red and white connector.

can anyone point me in the direction of a link or guide from what i am describing? i have looked through all the punto guides on the site i cannot find anything fitting my description other than the guide on fitting the factory fitted sub of which i cannot see the step i need.
 
The factory fitted sub works slightly different to the standard aftermarket bins

The Rear sub is told by the HU when to switch on - so check that the new HU is actually putting out a 12v Signal to the Sub via the Grey Wire in the HU connector (cars)

As the Sub has a speaker feed from both rear speakers anyway - the power is constant and so is the earth

Yellow plug extra is possibly for a CD changer? in car phone?

Ziggy
 
i tried posting this the first time however i posted this query ignore all other leads in the pic what i have thats not connected is the yellow adaptor there are 4 wires attached. i'll pull the hu out tomorrow an tell you what colour the wires are if it helps

an thank you for the advice i shall try that tommorow :)

$T2eC16hHJHYE9nzpgJFTBRKmlU1StQ~~60_12.JPG
 
Last edited:
Back
Top