The Panda Nut
Nutty about Pandas Infected by Panda virus and OPD
The filler had no dust cap . I fiched teh one from my PX.
Using a sharp drill bit I cut a hole in the plastic part behing the filler flap just twiddling the drill with my fingers.
The dust cap just pushed on.
Total time to do 5 minutes. Iwouldnt use a drill for fear of damaging teh filler flap if it overshot.
Using a sharp drill bit I cut a hole in the plastic part behing the filler flap just twiddling the drill with my fingers.
The dust cap just pushed on.
Total time to do 5 minutes. Iwouldnt use a drill for fear of damaging teh filler flap if it overshot.