Technical Calibration issues

[Fiatinaus]

Hi all
Just did a clutch replacement on a friend's fiat with the duellogic transmission
Managed to sort out the starting issue but now it won't let us even commence calibration
Numerous issues
Hydraulic pressure
Car must be in neutral before commencing but it is
One test is asking us to disconnect pump
And psi must be above 45 psi
But everything was reinstalled the way it came off
Anyone had similar issues

 

[puntodeltathema]

Did you remove the actuator before removing the gearbox, or take the whole lot out in one go? (Not sure if that is even possible on a 500).

 

[Fiatinaus]

Removed the robot

 

[puntodeltathema]

It's quite easy to knock the gearbox into a gear if you have to wrestle the robot back on. And once it's there the calibration process won't be able to be started, and sadly the only way is to remove the robot again and reset both sides (robot and gearbox) manually to neutral....

 

[Fiatinaus]

The car rolls freely so assuming it was in neutral
With the robot removed looking at top of gearbox
What position should the selectors inside be

 

[puntodeltathema]

See this thread...

Robot help please urgent | FIAT 500 (2007+)

Hello can anybody point me in the correct area Today I had to remove the fiat 500 diesel sport selespeed robot as a pipe needed fixing When i removed it the car was stuck in neutral and started just kept coming up gearbox error When i fitted it back on its now saying stuck in 5th gear and...

www.fiatforum.com

 

[Fiatinaus]

Stupid system
Now it seems to be in reverse and won't let calibration commense
Also says it cannot establish connection
(Like it not communicating with gearbox )

Changing the gearbox back to neutral seems easy enough but how do I manually change the robot back to neutral position
Thanks

 

[puntodeltathema]

Hi - you just need to manipulate the levers manually