Technical brake fluid draining help

Currently reading:
Technical brake fluid draining help

slugworth1987

The Ratter
Joined
Oct 4, 2010
Messages
977
Points
222
Location
St Austell, Cornwall
hey all i need a way to drain my brake fluid as its blacker than space but i dont want to remove the pot or break brake lines (avoiding as much bleeding as possible here)

any ideas i was thinking of a pipe and syphon but sucking and im guessing dot4 is a little bit bad for your lips/body lol
 
Just flush it through with fresh fluid.

If you have the time, space and enough old coffee jars you can do it by gravity.

Support the car fully off the ground, remove all wheels, attach bleed tubes and open all the valves.

Keep topping up to ensure no air gets in.

Cheers

D
 
Your going to have to open the bleed valves and let the old flush through. As it's draining you can fill the resevoir with the new stuff as old oil doesn't mix with new that quick.

Just a case then of checking the color of the oil as it drains.

Thanks

X
 
Last edited:
Back
Top