Jedidev
New member
i was just driving my Brava and i was driving along everything going well came to a line of traffic and pressed the brake peddle and got no risitance and the pedal went to the floor easily and the brakes were working very minimaly.
had no choice but to continue futher to get to a safe place to stop and the after pumping the pedal a few time got them going again. but then failed futher down the road.
to cut a long story short i checked the pedal and everything seems intact i checked the brake fluid resovour and found the rubber seal on the cap had split could this be the problem? is the pressure escaping from there and thats why the brakes are working and not working?
i tightened the brake fluid cap really really tight and the brakes appear to not be failing now....
any advice would be awesome :slayer:
had no choice but to continue futher to get to a safe place to stop and the after pumping the pedal a few time got them going again. but then failed futher down the road.
to cut a long story short i checked the pedal and everything seems intact i checked the brake fluid resovour and found the rubber seal on the cap had split could this be the problem? is the pressure escaping from there and thats why the brakes are working and not working?
i tightened the brake fluid cap really really tight and the brakes appear to not be failing now....
any advice would be awesome :slayer: