Technical Blower motor connector

[Mass88]

The blower motor has stopped working on my partners fiat 500 2014. I’ve found a broken connection on a Delphi plug situated behind and above the clutch pedal, Ive attached a video showing the connector.

I’ve had a hard time identifying it looking at the wiring diagrams, can anyone tell me which plug this is and if I am able to buy some new terminations to fit to the snapped wire so I don’t have to replace the whole connector. Thanks in advance.

 

[John202020]

If you're confident that broken wire is the fault, I'd, cut the wire on the other side of the other side and solder in a bridging wire?

 

[Mass88]

If you're confident that broken wire is the fault, I'd, cut the wire on the other side of the other side and solder in a bridging wire?

I have confirmed that this is the fault as when I push the wire back into its socket the blowers come on. I’m going to bridge it if I can’t find a suitable termination to repair it with.

 

[yann]

I would go with bridging it too...lot less hassle

 

[John202020]

Even terminal block would last the life of the car, solder and heat shrink best