Styling At last!!! :P Seicento..

[richard33dees]

It's a very good kit for the money, still not fitted my camber bolts yet hopefully by the end of the month tho

 

[NosherCento]

am thinking of getting the 70/50 kit, worth the money?
how much harsher does it make the ride?
also, do you get much scrape?

and is it worth getting camber bolts on standars suspension?

 

[clock34]

its always worth getting as it adjusts the same amount on lower as on higher suspension.

i love my kit, alot of people who have been in my car were suprised how smooth the ride is. over normal roads its pretty much the same as it always was but bigger bumps are harsher. compared to cheaper kits you get what you pay for and i think there worth the money tbh. ive lowered a few cars and all have been abit crashy but these arnt in everyday driving.

i get abit of scraping every now and then. i park on a kerb and if my wheel goes up and drops off it hits, and if you drive up them you need to be carefull. i get no rubbing on arch's ect with 10mm front and 3mm rear spacers.

 

[NosherCento]

i want to stance it, so im going with the 70/50 kit, camber bolts, and 100mm spacers on the back and 3mm on the front. will look mean

 

[clock34]

i run 10mm on the front and they only only just misses the inner arch 3mm would be silly/impossible at that drop. 100mmspacers will need rear arches rolled as mine are close! but will look sick!! i want to do the same as i have 3mm rear and there not far enough out but the arches need doing first!

 

[NosherCento]

by 100mm, i meant 10mm cause i cant spell and am an idiot

 

[richard33dees]

It will look mean, although I think you can only camber bolt the fronts. If you want to camber the rears ah think you need camber shims which I believe go between the wheel and the drum.

 

[NosherCento]

not if i do the rear disc conversion whilst im at it

 

[clock34]

still need the camber shim dont you?

 

[NosherCento]

probably. and i probably sound like an idiot now

 

[clock34]

haha. im not sure myself but thinking about how it attaches a shim sounds about right. but fook it and get the disks anyway!

 

[ycming]

No you can't adjust the camber at the rear, regardless of what you are using drum or disc .

Ming

 

[ycming]

i want to stance it, so im going with the 70/50 kit, camber bolts, and 100mm spacers on the back and 3mm on the front. will look mean

That's just stupid and will ruin handling, you need the front to have a wider track than the front.

Ming

 

[Fiatseicento2002]

That's just stupid and will ruin handling, you need the front to have a wider track than the front.

Ming

I think he means the front needs to be wider than the back