Technical Adding Oil Pressure Gauge

[nikiforos83]

Last week I changed oil to the Stilo and found time to add an Oil Pressure sensor with gauge.

It cost me 15 Euros for the sandwich adaptor and the Oil Sensor with the gauge.

I used Motul 6100+ Synergie 10W40 oil and new oil filter.

Fitting time about 1 hour (The difficult part is to insert the cable to cabin)

With warm engine and oil ----> 25psi

At 2250rpm ----> 50psi

At 3250rpm till 6500rpm ----->70-80psi

Cold start ----->80-90psi

 

[g8rpi]

Neat installation. I wonder if you could remove one of the blanking plugs in the existing filter mounting and screw the pressure transducer in there?

Robert G8RPI.

 

[dtimmins1985]

Nice mod... on my list of things to do... need to find a nice pod for my dash to take three gauges.

 

[Artermis]

Neat installation. I wonder if you could remove one of the blanking plugs in the existing filter mounting and screw the pressure transducer in there?

Robert G8RPI.

Might need a reducer / adaptor but I'd suspect you probably could.