Technical 12v issue

[Mick84]

Hello everyone. I have recently purchased the 12v power socket as my model did not have one. The wiring loom is there. However there is no relay or fuse in the engine bay. I have added a fuse and borrowed a relay and yet still no power. Could the wiring be capped and not actually wired up to the fuse box in the engine bay

 

[koalar]

Is there a wire going to each side of the fuse in the fuse box

My guess is it's a 1.1 active
And the wires from the A post to the fuse box is missing

 

[Mick84]

Is there a wire going to each side of the fuse in the fuse box

My guess is it's a 1.1 active
And the wires from the A post to the fuse box is missing

I've read that somewhere else too. Thank you

 

[koalar]

Simplest solution it to run a fused spur off the battery

There's several ways to do this

Just one option

fiat panda active eco 12v power point /aux socket | FIAT Panda (Mk3)

Hi all ive managed to find a different way of fitting a power point /aux socket on the active eco. Rather than going in through the wing and door there is a blanking plate in the middle of the bulk head near the top. Then just ran the wires through from the battery with a inline fuse and fitted...

www.fiatforum.com