Punto (Mk2/2b) Radiator cooling fan - budget repair - new fan unit

this guide was made after the swap had taken place,
I removed the working fan took pics, and replaced..so you will not see the DEAD FIAT unit in the pics - however it's just retained in the 3 x central rivet holes pictured,

the new outer mounts are 2 x "posts" pushed through the FIAT shroud plastic
and have a spring and washer/locknut - all from the kit



kit was @£28 and was used through 2 x British winters as is.
then was still functioning at this GUIDE point, removed after car sustained major front end impact = written off.

4,000 views and Zero comments..

Hope it helped somebody..

I did this on 2 x 188puntos..

But should be as cheap and effective on a 500/ Panda