V viper1253 New member Joined Mar 29, 2005 Messages 104 Points 35 Oct 7, 2005 #1 hi just changed headgasket on my 1999 weekend 2.0 20v and the rev are idleing at 2000 rpm shortly after being turned on, the revs are controlled by the ecu i believe. anything i should check.
hi just changed headgasket on my 1999 weekend 2.0 20v and the rev are idleing at 2000 rpm shortly after being turned on, the revs are controlled by the ecu i believe. anything i should check.
HP I was only doing 80... Parked in the garage Written a guide Joined Mar 22, 2002 Messages 13,429 Points 2,034 Location North East Oct 7, 2005 #2 Check for air leaking in, if it gets in after the throttle body it's the equivalent of having the throtle open slightly. The throtle cable's not caught or too tight, is it?
Check for air leaking in, if it gets in after the throttle body it's the equivalent of having the throtle open slightly. The throtle cable's not caught or too tight, is it?
OP OP V viper1253 New member Joined Mar 29, 2005 Messages 104 Points 35 Oct 8, 2005 #3 i'll check it out later and let u knoww.