Just sharing this little piece of information, for those who want to activate the rear camera on non-FIAT specifique smart self-installed radio.
So, take out the under panel plastic cover, and find out the wire as shown in the attachement. It is the + 12 V wire sending power to the reversing white bulbs.
Make a derivation on it, you can draw several miliampers comand current to your radio device, without disturbing the BCU.
So, take out the under panel plastic cover, and find out the wire as shown in the attachement. It is the + 12 V wire sending power to the reversing white bulbs.
Make a derivation on it, you can draw several miliampers comand current to your radio device, without disturbing the BCU.
