Guides by vtec

vtec
Updated
Views
6,613
Changing brake lines on the mk1 This guide will show you how to replace your brake lines if they are damaged or leaking., you'll need to remove the wheel and jack up the car first, This is what the new brake line will look like, If you look behind your front wheels you will notice there is...
vtec
Updated
Views
65,147
First you will need to loosen the timing belt tensioner and remove the belt from the water pump pulley etc. The undo the 3 10mm bolts in the pump and there is a 10mm nut on the bottom far corner. once thats done just give the pump a bit of elbo grease and it will come out. This is the old...
vtec
Updated
Views
12,141
This guide will show you how to replace the original ashtray and lighter etc that comes on most of the lower model punto's, for a nice new centre console with a pocket for your CDs.,, This is the location of some of the allen key screws you'll need to remove, There are 4 allen key screws...
vtec
Updated
Views
14,843
How to bleed the cooling system, including pics.,.,:thumb: this is the bleed screw on the radiator, This is the one behind the airbox. This is the fan switch (daves wording) Undo both screws Fill header tank right to the top Squeeze all the hoses Keep repeating this until a fair...
vtec
Updated
Views
20,261
Dismantling Dials(for fitting custom dials) this guide will show you how to dismantle your dial clusters without damaging the needles and reinstaling the needles correctly.,.:thumb: this is the rear of the dial cluster just removed from the car. this is it before being dismantled...
vtec
Updated
Views
14,691
alarm fitting for the mk1 punto!(most common fiats listed) this is the alarm i'll be showing you how to fit.:thumb: http://cgi.ebay.co.uk/Car-Alarm-w-Immobiliser-Honda-del-Sol-Civic-2DAY-SHIP_W0QQitemZ140070929625QQihZ004QQcategoryZ75329QQcmdZViewItem these are the instructions...
Back
Top