|
| Thread Tools |
![]() | #1 | ||
Join Date: May 2018 Location: Whitchurch, Hants
Posts: 67 Thanks: 4 Trader Rating: 0 ![]() | Door hinge bolts Hi All, Does anyone know the part number or spec of the two bolts that attach the doors to the hinges, I can't find them on eper, could be just me being dumb! Ta Mike
__________________
| ||
![]() | ![]() |
![]() | #2 | ||
Join Date: May 2018 Location: Whitchurch, Hants
Posts: 67 Thanks: 4 Trader Rating: 0 ![]() | Re: Door hinge bolts Hi All, Does anyone know the part number or spec of the two bolts that attach the doors to the hinges, I can't find them on eper, could be just me being dumb! Ta Mike
__________________
| ||
![]() | ![]() |
![]() | #3 | ||
Join Date: May 2017 Location: Poole, Dorset.
Posts: 114 Thanks: 7 Trader Rating: 0 ![]() | ![]() Could the bolt have come loose and fell off somewhere where it keeps rattling or knocking? That might be your problem.
__________________
| ||
![]() | ![]() |
![]() | #4 |
Join Date: Dec 2006 Location: North West
Posts: 631 Thanks: 30 Trader Rating: 0 ![]() | Re: Door hinge bolts Hi just looking on eper at item 4, it looks like the bolts are welded to the hinge and are fastened with item 7 nut. I presume this is what you meant. Best Dave
__________________ 1996 Rosso Red, K&N filter, Powerflow exhaust, Strut brace, Eibach Springs,Monro Shocks, Eibach anti roll bars front and rear.Polyflex bushes,Custom made leather steering wheel. |
![]() | ![]() |
![]() | #5 | ||
Join Date: May 2018 Location: Whitchurch, Hants
Posts: 67 Thanks: 4 Trader Rating: 0 ![]() | Re: Door hinge bolts Hi Dave, Thanks for looking Not quite, there are two long vertical bolts (top and bottom) the door rotates on when you open it. According to the workshop manual these are taken out when the door is removed. When I get home I'll look at the workshop manual again, I think there might be a list of bolts and torque settings at the back somewhere. I've suspicion the bolt wasn't put back in after some work was done on that door, but I don't know. If it fell out it would probably just fall on the floor next time to door was opened.... Cheers Mike
__________________
| ||
![]() | ![]() |
![]() | #6 |
Join Date: Dec 2006 Location: North West
Posts: 631 Thanks: 30 Trader Rating: 0 ![]() | Re: Door hinge bolts O wow Mike, if one of those bolts is missing I'm thinking your door would be really sagging. When I stripped a Barchetta the top hinge had a nut at the bottom, the lower hinge a nut at the top. But I think both bolts were fixed items. Again I could be wrong. I've just looked through the collection of bolts from that strip and can't see any hinge pins. Sorry I can't help further.
__________________ 1996 Rosso Red, K&N filter, Powerflow exhaust, Strut brace, Eibach Springs,Monro Shocks, Eibach anti roll bars front and rear.Polyflex bushes,Custom made leather steering wheel. |
![]() | ![]() |
![]() | #7 | ||
Join Date: May 2018 Location: Whitchurch, Hants
Posts: 67 Thanks: 4 Trader Rating: 0 ![]() | ![]() Thanks Dave, Oddly the door fits well, just a couple of mm free play (rattle) when I lift it, so there must some additional positive location going on. They look like bolts in real life and the workshop manual, perhaps they screw into an insert? Can't find any data though, so I'll take the other side out when I get chance to have a measure
__________________
Last edited by Voko; 13-03-2019 at 20:25. | ||
![]() | ![]() |
![]() | #8 | ||
Join Date: May 2018 Location: Whitchurch, Hants
Posts: 67 Thanks: 4 Trader Rating: 0 ![]() | Re: Door hinge bolts Just pretty standard M6 x25 high tensile bolts in the end, they screw into the pin and perhaps expand it....the door doesn't just fall off without it! Anyway put a new bolt in and the free play in the door has gone ![]()
__________________
| ||
![]() | ![]() |
![]() | #9 |
Join Date: Dec 2006 Location: North West
Posts: 631 Thanks: 30 Trader Rating: 0 ![]() | Re: Door hinge bolts Good you have sorted, but they sound like different hinges to the ones fitted to my car.
__________________ 1996 Rosso Red, K&N filter, Powerflow exhaust, Strut brace, Eibach Springs,Monro Shocks, Eibach anti roll bars front and rear.Polyflex bushes,Custom made leather steering wheel. |
![]() | ![]() |
![]() | #10 | ||
Join Date: May 2018 Location: Whitchurch, Hants
Posts: 67 Thanks: 4 Trader Rating: 0 ![]() | Re: Door hinge bolts What year is yours Dave, mines '99, seems an odd thing to change, but it is Italian!..
__________________
| ||
![]() | ![]() |
![]() | #11 |
Join Date: Dec 2006 Location: North West
Posts: 631 Thanks: 30 Trader Rating: 0 ![]() | Re: Door hinge bolts It's a 96 reg Mike
__________________ 1996 Rosso Red, K&N filter, Powerflow exhaust, Strut brace, Eibach Springs,Monro Shocks, Eibach anti roll bars front and rear.Polyflex bushes,Custom made leather steering wheel. |
![]() | ![]() |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
![]() | Rockburner | Ducato | 3 | 04-09-2018 21:58 |
Punto 2004 2 door drivers door hinge come away | Chrismallou | Lets Talk FIAT | 1 | 04-03-2018 16:08 |
3 door grande punto door hinge adjustment | steveboo | Newbie Central | 0 | 03-09-2016 12:57 |
Door hinge | Kate | FIAT Boo Archives | 2 | 20-02-2010 18:46 |