Where to buy mesh?

[GhostWKD]

Where can i get hold of mesh at least 115cm by 15cm? and if poss somewhere that can get it to me before sunday B)

 

[gaz.d]

u had no luck then in the DIY shops, try the yellow pages, i wouldnt no wot to look under though

Seicento Sporting, Modified Front Bumper, Saxo Custom Spoiler, Abarth Side Skirts, Bad Boy Bonnet, Afterburner Rear Lenses, 4" Powerflow Exhaust System, Abarth 14" Alloys.
IN THE PIPELINE:
-40mm Drop or Coilovers
New Front Bumper
Rear Splitter
New Mirrors (Not the cup ones[xx(], something different)
ICE Install to be completed
Check out my site: http://badboygaz.mysite.freeserve.com​

FIATForum stickers available PM me for details or see: https://www.fiatforum.com/forum/topic.asp?TOPIC_ID=10000
​

​

​

 

[gaz.d]

i found a web site, but i cant rememeber the address, im looking now for u .

its 130 x 20 and would be ideal for u, give me a min

Seicento Sporting, Modified Front Bumper, Saxo Custom Spoiler, Abarth Side Skirts, Bad Boy Bonnet, Afterburner Rear Lenses, 4" Powerflow Exhaust System, Abarth 14" Alloys.
IN THE PIPELINE:
-40mm Drop or Coilovers
New Front Bumper
Rear Splitter
New Mirrors (Not the cup ones[xx(], something different)
ICE Install to be completed
Check out my site: http://badboygaz.mysite.freeserve.com​

FIATForum stickers available PM me for details or see: https://www.fiatforum.com/forum/topic.asp?TOPIC_ID=10000
​

​

​

 

[GhostWKD]

looked in b&q, they got like 20m of chicken wire which wud b ok i guess but i dont need 20m (plus its £25, might as well try get properstuff for that)

or they got this square type mesh, rather than the octagon type mesh which is a bit cheaper but still

 

[gaz.d]

im sure it was from www.abstyling.co.uk but there website has changed and its s**t, your best e-mailing them

Seicento Sporting, Modified Front Bumper, Saxo Custom Spoiler, Abarth Side Skirts, Bad Boy Bonnet, Afterburner Rear Lenses, 4" Powerflow Exhaust System, Abarth 14" Alloys.
IN THE PIPELINE:
-40mm Drop or Coilovers
New Front Bumper
Rear Splitter
New Mirrors (Not the cup ones[xx(], something different)
ICE Install to be completed
Check out my site: http://badboygaz.mysite.freeserve.com​

FIATForum stickers available PM me for details or see: https://www.fiatforum.com/forum/topic.asp?TOPIC_ID=10000
​

​

​

 

[T0m0]

I got a piece of aluminium mesh 50x100cm from b&q for less than £14 and is exactly the same as the stuff from halfords (you can get a smaller size than this from halfords for £20).

B&Q also do anodised gold mesh and the mesh with round holes.