Technical Wheel Data (specs) wanted

[FM02MZO]

I have a 2016 Ducato based 230Multijet based motorhome and I wish to buy a steel wheel to carry as a spare, I have priced a genuine Fiat 16" Alloy Light wheel (5 stud) and that is not in my budget.


Can anyone please tell me the PCD and Offset etc., of the wheel I require.


Thank You

 

[Peter James]

This thread might help;

source: http://forums.outandaboutlive.co.uk/forums/Motorhomes/Motorhome-Matters/PJB-Baccs/45547/

 

[taffybloke]

The 16" wheels are 5x130 pcd and offset 68


Mike

 

[FM02MZO]

The 16" wheels are 5x130 pcd and offset 68


Mike

The 2016 Burstner Nexxo Sovereign t740 is fitted with Fiat's light alloys , I have measured the PCD and I get it to be 5x118

 

[Peter James]

The 2016 Burstner Nexxo Sovereign t740 is fitted with Fiat's light alloys , I have measured the PCD and I get it to be 5x118

As I understand it the 'Light' versions (15" wheels) and 'Heavy' versions (16" wheels) have different hubs so their wheels are not interchangeable. (Engine size is irrelevant.) But to complicate matters further, different 16" wheels were fitted to the 'Light' versions for some of the later motorhomes. Sounds like thats what you have got.

 

[taffybloke]

As peter said the light chassis used 15" wheels at 118 pcd and the heavy chassis used 16" wheels at 130 pcd so they are not interchangeable.

One way to check what chassis you have is to check the center bore hole of the wheel as the light version has a hub diameter of 71.1 mm and the heavy used a hub diameter of 78.1

You may have 16" wheels but to the spec of a light chassis. This is assuming Fiat have not changed the wheel spec on the x290 chassis from the x250.


Mike