wooah!! that's a clean engine!! lets hope it solves all the problems! i'd also be interested to see how long it stays looking like that!
Hi,
You can replace the rubber mount with everything in place, there are four 10mm bolts. The two front ones are easy, the two rear ones are more tricky as access is difficult, between the manifolds. You'll need a tube wrench, a socket and ratchet wrench or spanners won't work.
I'd rather replace the mount in situ than remove the manifold (manifolds are difficult to remove, you need new gaskets, bolts are difficult to reach)
all the best,
zp