Smally . Parked in the garage Joined Jul 18, 2007 Messages 940 Points 189 Location Derby Feb 28, 2008 #1 is there a way of removing profesional tints?
I IceAx New member Joined Dec 29, 2007 Messages 80 Points 18 Mar 1, 2008 #2 Yeah, start to peel off then use a new stanley blade to remove the rest. Its an easy job but very time consuming, if you have it on the rear window, be careful not to cut the heated elements in the window with the blade. Andy
Yeah, start to peel off then use a new stanley blade to remove the rest. Its an easy job but very time consuming, if you have it on the rear window, be careful not to cut the heated elements in the window with the blade. Andy
OP OP Smally . Parked in the garage Joined Jul 18, 2007 Messages 940 Points 189 Location Derby Mar 1, 2008 #3 theres no way it can be in the middle of the glass can it?
Benjammo Patron member Written a guide Joined Nov 10, 2007 Messages 1,347 Points 340 Location Barnsley Mar 6, 2008 #4 its very doubtfull, most tints are just a thin film on the inside of the glass, heating it with a hot air gun or a hair dryer should make it easyer to pull off and leave less to clean up after.
its very doubtfull, most tints are just a thin film on the inside of the glass, heating it with a hot air gun or a hair dryer should make it easyer to pull off and leave less to clean up after.