hi i started wiring my stilo today,intending to show pics blow by blow ..its the wiring to the bonnett section, to the AE plug and AA plug the drawing supplyed is very vauge. bit of a nightmare to start ,and i am stuck at one point ,i am taking pics as i go along , the drawing is very vague ,the problem is at the EA PLUG AND THE AA PLUG in the engine compartment on the drawing is as wire 3,wire 2,wire 59..but dose not make it clear what position on the plug or what colour it should be.it says wire 2 goes to EA plug at number 23 but when i looked its a green wire ,and thats the so called feed live+ ,,,lol..so with the light going and the fog coming down,,,i left wires off ,,,to seek help,on the forum hope somebody who as fitted can help me...the drawing for inside the car gives a better drawing and shows the pin numbers on the plugs...but the bonnet plugs it vaguely shows you,,,ahhh...hope this all makes sense .....if not i am intending to stick on the web forum blow by blow pictures......i have had a word with the fiat dealer (blood out of a stone comes to mind!) and thay have the same drawing as i do...and reading between the lines thay have fitted by trial and error.but was still gonig to charge my £200 to fit.
all the best Roger
can any body help who as fitted..one and.when i have fitted it,i hope to put blow by blow pictures ,so no one as to pull hair out(which i have none...lol)