Guides by Ben R

Removing the FIAT Stilo Grille Tools you will need: T30 Torx Driver Small pry bar or flat ended screw driver How to do it: First, undo the torx bolts that hold the top of the bumper on. Next, gently pull the bumper forward and look behind it - you should see the lugs that hold the grille...

Tools you will need. 1. 3mm drill 2. 4.5mm drill 3. 5.5mm drill 4. Small tube of copper grease 5. 1 large cable tie (selespeed models only) 6. Small open 10mm spanner 7. 10mm socket, ratchet & extension bar 8. Marker pen 9. 17mm spanner 10. 24mm spanner 11. Hobby/hack saw (selespeed models...

Tools you will need 1 torque wrench 1 17mm deep socket 1 extension for socket (if required) 1 jack (trolley jack better as it will take less time) 1 pair of axle stands 1 pot of paint (hammerite usually preferred) 1 wire brush or scotch cloth 1 can of brake cleaner or panel wipe 1 fine brush...

Tools you will need: 1. a long 3mm drill bit & drill. 2. 1 6-6.5mm drill bit 3. 1 caulking gun. 4. 1 tube of sika-flex or sticks like sh*t 5. 1 Mike Norton or a friend of similar height would be extremely advantagious! :D 6. 1 hole cutter or 20mm drill bit. 7. 1 can of panel wipe or...

Tools you will need: 1 phillips screw driver. 1 caulking gun. 1 tube of either Sika flex or tiger seal 1 small bottle of panel wipe or thinners. 1 roll of heavy duty duct tape. 1 trolley jack. 2 small axel stands. 4 small blocks of wood(any type) 1 friend for extra pair of hands & to hold the...

Tools you will need: 1 1/4" ratchet & 10mm socket & a long extension bar 1 stubby phillips screw driver 1 T25 torx driver 1 10mm spanner (make that 2) A small but sharp knife 1 tack remover/pry bar small.