General Stanford swap/sell/wanted thread

[Lecook]

So guys stanford isnt far away and nobody has made a swap sell and wanted thread so I figured id get one going

Im after
a selector box with cables for a sei sporting with reverse detente
A seicento bottom pair of seicento window rubbers

I have a few spi bits
a few 1.4 16v engine bits for a punto mk2b
A 38mm p75 tb
And maybe a few othe bits and bobs

Let me know if you want anything specific and ill see what I have in the cave

Cheers guys

Lee

 

[jatkinson]

some shims to sit in the bucket as long as there bigger than 4.20

 

[The Black Box]

some shims to sit in the bucket as long as there bigger than 4.20

I might have some ill see if I can find my shim collection

I have everything for sale on my list in the classified plus probably a few other bits audio etc

Wanted 899 rear lights and front indicators and an early style clock, speedometer the one without rev counter all the light are in squares down one side

 

[jatkinson]

Orange indicators? ill bring you them , and im sure ive got 899 lights , ill double check today

 

[Cento186]

I've got some much more worthless stuff, Standard Sei Sporting springs, full set of sporting wheel bolts, old sony xplod head unit, P75 cam sprocket with bolt, silver sporting dash piece and a set of sporting alloys (although I hope will sell before stanford).

Wanted: Anything cheap for more power, i.e induction kit/866 cam/magnecor leads. I could also do with a pair of clear indicators and the dust covers for the top mounts (probably a bit OCD)

 

[Todger182]

I'll be coming but not in a fiat (atleast I don't think).

I'll bring whatever people want.

1.1 1.2 8v ported and polished Throttlebody (not bored out)
1.2 16v ported and polished throttlebody
2 sets of 1.4 16v polished pistons (one set are .1 oversize)
1.4 16v knife edged crankshaft
1.2 16v flywheels x2
1.2 16v crankshaft x2
1.2 16v pistons
Polished brake servo for cinq/sei
Clear MPI expansion tank
Ported and polished 1.2/1.4 16v cylinder head (also has 3 angle valve cut and new valve guides)(spare unused)
Ported and polished 16v inlet manifold
Pair of mk1 punto sporting 16v cams (slightly spicy over the standard items)
16v conversion (used with supersprint manifold)manifold back stainless exhaust inc swivel flange, chrome backback, 200cell sports cat, 3" outward rolled tip, and all 2" tubing (only bring this if somebody genuinely wants it). Could be used with any engine if you have the front section remade.

I have more parts, but this is everything off the top of my head.

Let me know what people want, I won't bring everything with me as there is a lot.... :bang:

Thanks

X

 

[Lecook]

Rob can you bring that 16v bottom pulley mate and ill try remember that crank pulley

Cheers
Lee

 

[The Black Box]

Don't need that crank pulley the 8v one now (chras wanted that one) and the bottom pulley I might be using ill let you know when I can get the car sorted

 

[wrightyy]

Lecook are you wanting to keep this just for Cinq & Sei parts, or can I put some mk2 punto bits in?

Wrightyy

 

[Eklipze3k]

@Lecook are you wanting to keep this just for Cinq & Sei parts, or can I put some mk2 punto bits in?

Wrightyy

Start a thread in the Mk2 section and ask Chris or Russ to sticky it

 

[Sir16v]

bringing with me set of cinq sporting alloys,1 good tyre,cinq sporting springs,cinq fuel tank,

looking to trade my 899 style rear lights for sporting set? got me an early cinq,
any one got p75 throttle body bolts so i can fit my spacer? standard cinq ones are too short,

may have few smaller bits and pieces il bung in the back

 

[The Black Box]

Probably got the tb bolts and if jatkinson hasn't got his lights then ill trade my sporting lights for the 899 ones

 

[Sir16v]

Probably got the tb bolts and if jatkinson hasn't got his lights then ill trade my sporting lights for the 899 ones

sweet il bring a few tools with me too

 

[jatkinson]

If got the front Orange ones , still looking for the rear ones

 

[Tabby46]

Hi all i'm new to this and am going to stanford in my cinq sporting and am after some seats for it if anyone has any? Dont mind fitting full set of new seats if there not sporting ones if some are available.

 

[Lecook]

Not long now fellas, still after a mk1 1.2 16v aux/crank pullet if anyone has one??

 

[jatkinson]

any one got any a oil breather Filter ?? they can bring need one as its making a mess of my engine

 

[Sir16v]

any one got any a oil breather Filter ?? they can bring need one as its making a mess of my engine

that the hose going to airbox?

 

[Reuuk]

that the hose going to airbox?

ill answer for jatkinson ..

Yes

 

[Sir16v]

ill answer for jatkinson ..

Yes

awsome il put in the boot for stanford