Technical Spare wheel technical info required

[elboy]

Hi,

I have a 2004 Stilo 192 1.9 JTD 3 door complete spare wheel kit available for sale and have been asked the distance between the wheel bolt holes on the spare wheel. It looks to be 7cm but does anyone have the technical information on this or know where I can find it please. It’s difficult to measure to an accuracy that would be required.

Thank you to anyone who can help.

 

[Davren]

Stilo wheels are PCD 4x98, meaning that there are 4 bolts, and the centres of the 4 bolts are on a 98mm diameter circle.
.

 

[varesecrazy]

Yes FIAT is conventionally 98PCD

easiest method:

Get a tape measure

Set the wheel so the 4 bolt holes are at 'compass points' North East South and West

Put the tape measure on the WEST hole
With the 100mm mark on one edge of the hole (left edge)
The East hole..same Left edge should now say 198mm (100 + 98 )


Ask if you need more info

 

[elboy]

Stilo wheels are PCD 4x98, meaning that there are 4 bolts, and the centres of the 4 bolts are on a 98mm diameter circle.
.

Thank you very much for your speedy and clear answer.

 

[elboy]

Yes FIAT is conventionally 98PCD

easiest method:

Get a tape measure

Set the wheel so the 4 bolt holes are at 'compass points' North East South and West

Put the tape measure on the WEST hole
With the 100mm mark on one edge of the hole (left edge)
The East hole..same Left edge should now say 198mm (100 + 98 )


Ask if you need more info

Thank you so much for your answer. Much appreciated.

 

[varesecrazy]

Thank you so much for your answer. Much appreciated.

Did that work..?

Got 198 ok??

 

[elboy]

Did that work..?

Got 198 ok??

I’m waiting to here back from my prospective buyer as he asked the question of me.