Technical Spare Dash Buttons

Currently reading:
Technical Spare Dash Buttons

bennett

New member
Joined
Mar 13, 2006
Messages
84
Location
Crewe
How would go about changing the spare buttons in my dash to a switch for interior neons?

CarLights005.jpg


Heres the neon switch and from a pic from underneath the dash

CarLights006.jpg


CarLights022.jpg
 

tinnion87

New member
Joined
Sep 30, 2005
Messages
101
Take out the dash centre console.

Remove the button area, and drill a mounting hole in one of the blanked switches
 

charlieboy

New member
Joined
Dec 14, 2004
Messages
3,875
Location
east mids. derby.
why not mount it on the plastic plate thing to the right of the steering wheel.

drill a hole and push the switch in, jobs a good'un
 
OP
OP
bennett

bennett

New member
Joined
Mar 13, 2006
Messages
84
Location
Crewe
So theres the two screws at the top of the console two at the bottom and 1 under the central dial, i didnt know about the central one thats most probably why it would come off.

Are there any more screws?
:slayer:

I would have it by the steering wheel but id rather keep it central within the car
 
OP
OP
bennett

bennett

New member
Joined
Mar 13, 2006
Messages
84
Location
Crewe
Cheers for that i now how to get to the buttons now, the existing buttons are there is it ok to pull out the power at the back so i can fully remove the console panel?:slayer:
 
Joined
Nov 30, 2005
Messages
2,181
If your talking about the plug that plugs into the switch console, thats perfectly ok to remove. It's only connecting the switch panel to the wiring loom of the car.
 
Top