Technical sky roof n/w

Currently reading:
Technical sky roof n/w

wardy33

New member
Joined
Jan 17, 2011
Messages
15
Points
6
Location
perthshire
last week my son playing the goat on a frosty day decides to open my sky roof ,yes he managed to get the 1st panel to raise but the rest that was a different story .Looks like it now misalined how do i go about taking off the roof skin to check it and maybe repair it , anyone have plans ...
 
These are the instructions from eLEARN (the Stilo workshop manual).
.
 

Attachments

  • Roof 1.JPG
    Roof 1.JPG
    68.7 KB · Views: 44
  • Roof 2.JPG
    Roof 2.JPG
    163.3 KB · Views: 41
  • Roof 3.JPG
    Roof 3.JPG
    73.7 KB · Views: 40
  • Roof 4.JPG
    Roof 4.JPG
    91.1 KB · Views: 48
  • Roof 5.JPG
    Roof 5.JPG
    75.4 KB · Views: 46
  • Roof 6.JPG
    Roof 6.JPG
    53.7 KB · Views: 45
  • Roof 7.JPG
    Roof 7.JPG
    32.6 KB · Views: 43
  • Roof 8.JPG
    Roof 8.JPG
    103.9 KB · Views: 40
  • Roof 9.JPG
    Roof 9.JPG
    77.5 KB · Views: 41
Try pressing and holding down the round roof switch for 10 seconds this should rest your roof. You may need to try this a few times (probably best with the engine running as it draws a lot of current).
 
Try pressing and holding down the round roof switch for 10 seconds this should rest your roof. You may need to try this a few times (probably best with the engine running as it draws a lot of current).

The full procedure for this is shown under the paragraph "RESETTING THE CONTROL UNIT MEMORY" in the instructions I posted above.
.
 
Back
Top