Hi All
Can anybody confirm if MultiEcuScan (Paid for version) should read a Bosch ECU on a 2007 gen 2 Scudo van 1.6 Diesel. I have the software and KKL interface but software is saying it cannot talk to the ECU. I know multiscan will ony read a Bosch Monomotronic MA1.7 unit but I do not know if the ECU I have is that, or the ECU or wiring has an issue. I have checked the diagnostic plug and all pins have all the correct voltages and earth resistances in the right places.
Also, is the intank sender unit a lift pump as well as a sender, supplying fuel to the main high pressure pump
Van currently cranks but wont fire. Any ideas greatly appreciated
Thanks in advance
Can anybody confirm if MultiEcuScan (Paid for version) should read a Bosch ECU on a 2007 gen 2 Scudo van 1.6 Diesel. I have the software and KKL interface but software is saying it cannot talk to the ECU. I know multiscan will ony read a Bosch Monomotronic MA1.7 unit but I do not know if the ECU I have is that, or the ECU or wiring has an issue. I have checked the diagnostic plug and all pins have all the correct voltages and earth resistances in the right places.
Also, is the intank sender unit a lift pump as well as a sender, supplying fuel to the main high pressure pump
Van currently cranks but wont fire. Any ideas greatly appreciated
Thanks in advance
Last edited: