Hello all, hopefully someone can help me, my right front fog light does not when activated, the left side works perfectly, i also changed the H11 bulb but no effect, when i test the connection there is no power, could the right side cable harness be at fault. ?
Technical Right front fog light does not work.
- Thread starter GiulianoB
- Start date
Currently reading:
Technical Right front fog light does not work.
Hi it could be !but it could also be the signal from the Bcm is not getting to the lamp! a wiring diagram would help you trace it back! probably get one on line or if its a 1.2 500 there is a HYANES manual availible!
First check the the connector to the light unit, if no voltage trace back along cable
i checked the connector, indeed no voltage! can i trace back along the cable without taking off the front bumper?
Probably not, how thick is the wire going to the other light, could you simply splice into it and run a new feed to the other one?
Hello, the wire is not really that thick, i could simply splice into it and run the wire to the right side but i do not know if this can create electrical problems into the future.
If I remember right the s a joint on the cable along the bumper where the cables runs so it's quite possible you will need to take the bumper off
@typecastboy will probably have a good idea where the dog light wiring runs
test for power with a multi meter!
