Technical Rev Counter In Seicento S

[mikey543]

Hi,

I have a Seicento s (not sporting) and would like to fit a regular sporting rev counter. I've seen some threads that say there is a 4 pin connector beneath the dash but when I took off the centre heater panel I could'nt see anything!

Please help.

 

[gazzaman2k]

give up coz it wont work on a seicento s or SX

 

[fingers99]

Hi,

I have a Seicento s (not sporting) and would like to fit a regular sporting rev counter. I've seen some threads that say there is a 4 pin connector beneath the dash but when I took off the centre heater panel I could'nt see anything!

Please help.

There is indeed a 4 pin connector, on the Sei Sporting: it fits into the back of the rev counter and is a pretty rare connector. Without that, you'll really struggle. If you're in a scrappy and they've removed the r/c, it's the one you'll see popping out if the hole where the r/c was.

I see no reason whatsoever why the Sporting rev counter shouldn't work, but it ain't going to be easy as both the dash and the harness are subtly different.

 

[mikey543]

Thanks for the quick reply

I never thought it would be so difficult...

 

[Luke M]

i looked at this a while back, you have to cut the dash and noones managed it so im guessing the wiring harness is different.

 

[mikey543]

If there is no 4 pin connector then I guess you'd need to cut through the dash and into the engine bay..then a ground, +ve 12V and engine pulse and attach those to the sporting tacho. Sounds quite tricky!