My climate control was playing up so I brought a second hand one for £10.
I also brought a broken set of clocks(speedo etc.) because the clear plastic on the front of mine had a few small scratches from where I had thrown my keys. :doh:
Once I'd swopped them over and reinstalled them the mileage was flashing(as expected) so I fired up FiatECUScan and found:
CAN MODULES THAT REQUIRE EOL PROGRAMMING::
Body Computer Node (NBC):
Dashboard Node (NQS):
Climate Control Node (NCL):
Started the Proxi-Alignment and it Failed.
Here's the log file.
Reading CAN configuration data ...
CAN CONFIGURATION DATA:
00 02 07 DF 00 02 07 DF 00 02 04 02 00 02 04 02 00 00 00 00 00
00 02 07 DF 00 00 04 09 00 02 07 DF 00 00 04 09 00 00 00 09 00
30 34 31 39 32 30 32 35 33 33 39 54 45 52 4D 3A 33 34 20 20 20 20 05 02 14 DF 07 02 00 09 04 00 00 F3 00 00 00 00 85 26 07 00 02 44 06 00 00 00 00 00 00 00 11 58 53 00 00
CURRENTLY CONFIGURED CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Electric Steering Node (NGE)
Dashboard Node (NQS)
Steering Wheel Controls Node (NVO)
Brake System Node (NFR)
Info-Telematic/Convergence Node (NIT/NCV)
Driver Door Node (NPG)
Boot Node (NVB)
Climate Control Node (NCL)
Passenger Door Node (NPP)
CURRENTLY AVAILABLE CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Electric Steering Node (NGE)
Dashboard Node (NQS)
Steering Wheel Controls Node (NVO)
Brake System Node (NFR)
Info-Telematic/Convergence Node (NIT/NCV)
Driver Door Node (NPG)
Boot Node (NVB)
Climate Control Node (NCL)
Passenger Door Node (NPP)
CAN MODULES THAT REQUIRE EOL PROGRAMMING:
Body Computer Node (NBC)
Dashboard Node (NQS)
Climate Control Node (NCL)
18/02/2011 18:34:40
CONNECTED TO:
FIAT STILO 1.9 JTD
CAN Setup / PROXI Alignment Procedure
--------------------------------------------------------------
CURRENTLY CONFIGURED CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Electric Steering Node (NGE):
Dashboard Node (NQS):
Steering Wheel Controls Node (NVO):
Brake System Node (NFR):
Info-Telematic/Convergence Node (NIT/NCV):
Driver Door Node (NPG):
Boot Node (NVB):
Climate Control Node (NCL):
Passenger Door Node (NPP):
:
CURRENTLY AVAILABLE CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Electric Steering Node (NGE):
Dashboard Node (NQS):
Steering Wheel Controls Node (NVO):
Brake System Node (NFR):
Info-Telematic/Convergence Node (NIT/NCV):
Driver Door Node (NPG):
Boot Node (NVB):
Climate Control Node (NCL):
Passenger Door Node (NPP):
:
CAN MODULES THAT REQUIRE EOL PROGRAMMING::
Body Computer Node (NBC):
Dashboard Node (NQS):
Climate Control Node (NCL):
EXECUTING ADJUSTMENT...
PROXI Alignment Procedure
Writing CAN configuration data ...
Writing to module: Body Computer Node (NBC)SUCCESS!
Writing to module: Dashboard Node (NQS)SUCCESS!
Writing to module: Climate Control Node (NCL)FAILED!
FAILED TO EXECUTE
Climate Control Node FAILED. :chin:
Double checked the connections, everything looks ok.
Anyone got any ideas why this might be happening?
I also brought a broken set of clocks(speedo etc.) because the clear plastic on the front of mine had a few small scratches from where I had thrown my keys. :doh:
Once I'd swopped them over and reinstalled them the mileage was flashing(as expected) so I fired up FiatECUScan and found:
CAN MODULES THAT REQUIRE EOL PROGRAMMING::
Body Computer Node (NBC):
Dashboard Node (NQS):
Climate Control Node (NCL):
Started the Proxi-Alignment and it Failed.
Here's the log file.
Reading CAN configuration data ...
CAN CONFIGURATION DATA:
00 02 07 DF 00 02 07 DF 00 02 04 02 00 02 04 02 00 00 00 00 00
00 02 07 DF 00 00 04 09 00 02 07 DF 00 00 04 09 00 00 00 09 00
30 34 31 39 32 30 32 35 33 33 39 54 45 52 4D 3A 33 34 20 20 20 20 05 02 14 DF 07 02 00 09 04 00 00 F3 00 00 00 00 85 26 07 00 02 44 06 00 00 00 00 00 00 00 11 58 53 00 00
CURRENTLY CONFIGURED CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Electric Steering Node (NGE)
Dashboard Node (NQS)
Steering Wheel Controls Node (NVO)
Brake System Node (NFR)
Info-Telematic/Convergence Node (NIT/NCV)
Driver Door Node (NPG)
Boot Node (NVB)
Climate Control Node (NCL)
Passenger Door Node (NPP)
CURRENTLY AVAILABLE CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Electric Steering Node (NGE)
Dashboard Node (NQS)
Steering Wheel Controls Node (NVO)
Brake System Node (NFR)
Info-Telematic/Convergence Node (NIT/NCV)
Driver Door Node (NPG)
Boot Node (NVB)
Climate Control Node (NCL)
Passenger Door Node (NPP)
CAN MODULES THAT REQUIRE EOL PROGRAMMING:
Body Computer Node (NBC)
Dashboard Node (NQS)
Climate Control Node (NCL)
18/02/2011 18:34:40
CONNECTED TO:
FIAT STILO 1.9 JTD
CAN Setup / PROXI Alignment Procedure
--------------------------------------------------------------
CURRENTLY CONFIGURED CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Electric Steering Node (NGE):
Dashboard Node (NQS):
Steering Wheel Controls Node (NVO):
Brake System Node (NFR):
Info-Telematic/Convergence Node (NIT/NCV):
Driver Door Node (NPG):
Boot Node (NVB):
Climate Control Node (NCL):
Passenger Door Node (NPP):
:
CURRENTLY AVAILABLE CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Electric Steering Node (NGE):
Dashboard Node (NQS):
Steering Wheel Controls Node (NVO):
Brake System Node (NFR):
Info-Telematic/Convergence Node (NIT/NCV):
Driver Door Node (NPG):
Boot Node (NVB):
Climate Control Node (NCL):
Passenger Door Node (NPP):
:
CAN MODULES THAT REQUIRE EOL PROGRAMMING::
Body Computer Node (NBC):
Dashboard Node (NQS):
Climate Control Node (NCL):
EXECUTING ADJUSTMENT...
PROXI Alignment Procedure
Writing CAN configuration data ...
Writing to module: Body Computer Node (NBC)SUCCESS!
Writing to module: Dashboard Node (NQS)SUCCESS!
Writing to module: Climate Control Node (NCL)FAILED!
FAILED TO EXECUTE
Climate Control Node FAILED. :chin:
Double checked the connections, everything looks ok.
Anyone got any ideas why this might be happening?
Last edited: