Technical Pipe nightmare

Currently reading:
Technical Pipe nightmare

Beclia

New member
Joined
Jan 27, 2024
Messages
1
Points
26
Location
Dorset
Please help cannot work out the hose I need for fiat 500 it attached underneath the windscreen I have no idea it's name
 

Attachments

  • 20231229_141134.jpg
    20231229_141134.jpg
    703.4 KB · Views: 62
  • 20231229_141125.jpg
    20231229_141125.jpg
    701.9 KB · Views: 41
Please help cannot work out the hose I need for fiat 500 it attached underneath the windscreen I have no idea it's name
I am guessing it is the top heater hose going through the bulkhead from the engine. Often a Fiat Dealer only part being, shaped and odd diameters, so you may have to identify it from their computer screen when ordering, depending on how helpful they are.
You will need new clips as those are use once type, plus new antifreeze and carefully get all the air out of the system to prevent further damage.
My question is ,why does it look like it has been sawn off and a chunk removed?
 
So, can you take a picture further away to help identify the area?
How did it end up this way?
Everyone, what's the chance someone has cut out the bleed valve section ?
Don't buy second hand
 
Last edited:
This post contains affiliate links which may earn a commission at no additional cost to you.
Back
Top