Technical Passenger window trying but not closing

[Triops]

Panda mk2 2008 1.2 eleganza

Couldn’t see a mk2 section hope this is in the right place

Passenger has been clunky and now is fully open. It moves up and down a few mm on the switch being pressed but won’t go any further. So there is an attempt at movement up and down. Any ideas what the issue is? I tried putting my fingers in to move the glass while trying to raise the window but no joy!

Any ideas?? Thanks

 

[koalar]

Panda mk2 2008 1.2 eleganza

Couldn’t see a mk2 section hope this is in the right place

Passenger has been clunky and now is fully open. It moves up and down a few mm on the switch being pressed but won’t go any further. So there is an attempt at movement up and down. Any ideas what the issue is? I tried putting my fingers in to move the glass while trying to raise the window but no joy!

Any ideas?? Thanks

Almost certainly broken clips, or come of the tracks

Plenty of threads on the clips. Getting the correct ones is getting difficult


Taking the panel off and investigating would be my next step

If it's the bottom clips and not the side a replacement regulator might be an easier solution

@irc is the expert on these