Panda 1.1

[Nenica]

yes..the lights go out

 

[koalar]

That's not correct

Have you got a multimeter, volt meter or test light

 

[Nenica]

Yes

 

[koalar]

Measure volts from a clean battery negative terminal to the clean part of the engine block while cranking

Easier if you have someone to help

 

[Nenica]

povećati minus od akumulatora do motora

 

[koalar]

Measure voltage from the block to battery negative while cranking and post the result

 

[Nenica]

u redu

 

[koalar]

Any progress

 

[Mike1alike]

Any progress

What are we, communists?! 'Work and progress' were their concern...
But good question. @Nenica prijatelju, any progress?!

 

[Nenica]

my friend...nothing is going right for me..I need to check the cam sensor..or examine it somehow..

 

[koalar]

What was the voltage

 

[Nenica]

between the minus pole of the battery and the engine...how should I measure it

 

[koalar]

Multimeter, voltmeter or test light

 

[Mike1alike]

my friend...nothing is going right for me..I need to check the cam sensor..or examine it somehow..

Check this out

Can you do that?

 

[koalar]

Why are we looking at the cank sensor at the moment

Panda 1.1

yes..the lights go out

www.fiatforum.com

Says the battery and oil light go out during cranking

This is not correct

Until this is sorted then car will never start

 

[Nenica]

..from the oil it goes out..the alternator lights up and the chek ingin lights up

 

[Mike1alike]

Says the battery and oil light go out during cranking

This is not correct

@Nenica, does they really go out?

 

[koalar]

..from the oil it goes out..the alternator lights up and the chek ingin lights up

That different to what we were originally told

 

[Nenica]

three pin cam sensor..pin position - + signal

 

[Mike1alike]

three pin cam sensor..pin position - + signal

Is that what you have? 3-pin?